HP Compaq Business Notebook nc8000 Maintenance And Service Manual page 107

5. Disconnect the two antenna cables 1 from the board. Make
note of which cable connects to which terminal.
6. Spread the retaining tabs 2 that secure the Mini PCI
communications board to the socket. The free end of the
board rises.
7. Pull the board away from the socket at a 45-degree angle 3.
Removing the Mini PCI Communications Board
8. Remove the Mini PCI communications board.
Reverse the above procedure to install the Mini PCI
communications board.
Maintenance and Service Guide
Removal and Replacement Procedures
5–23