Step 5 Connecting The Printer To The Computer; Printer Connections - Kyocera Mita FS-1900 Installation Manual

Connecting the Printer to the Computer
5
STEP
There are various ways of connecting the printer to the computer, such as through the
parallel interface connector, through the USB (Universal Serial Bus) interface connec-
tor, through the option serial interface board kit (IB-10E) or through the option network
interface card.

Printer Connections

Serial Interface
Before performing this step, be sure to turn off both the printer and the com-
puter's power switches and unplug the printer's power plug from the power
outlet. Failure to do so may result in electrical shock.
The standard Centronics parallel interface connector (
connector (
Option Serial Interface
Board Kit (3.3 V DC)
Connector for option sorter
(See the option sorter's
user's manual.)
Parallel Interface
USB Interface
) are located on the rear of the printer.
Printer (Rear)
Network
) and USB interface
Power Supply
Option Network
Interface Card
(3.3 V DC)
7