Kyocera Mita FS-1900 Installation Manual page 15

Clip
Removing the Dust Cover
7
Set the stack of paper so that it is under
the clips as shown.
Clip
8
Insert the paper cassette into the slot in
the printer. Push it straight in as far as
it will go.
There is a paper gauge on the right
side of the front of the paper cassette
to indicate the remaining paper
supply. When paper is exhausted, the
pointer will go down to the level of
Paper Gauge
9
If you have installed a paper cassette
that can hold the Legal size paper,
install the dust cover at the back of the
printer. (The Legal size cassette and the
dust cover are supplied for U.S.A. only.)
(empty).
13