Setting The Ip Telephone Headset Transmit Volume; Viewing Ip Telephone Terminal Information - Toshiba Strata CIX IPT Administrator's Manual

DKT/IPT Settings

Setting the IP Telephone Headset Transmit Volume

Setting the IP Telephone Headset Transmit
Volume
1. Press
2. Press
3. Press the Feature Buttons to turn the LEDs On/Off for the desired volume
transmission level (see
Table 4 Volume Level Transmitted from Headset Microphone
FB3
ON
ON
ON
ON
OFF
OFF
OFF
OFF
4. Press FB4 for handset voice output in speakerphone mode (LED On = with, LED
Off = without).
5. Press
6. Go off-hook and hang up.

Viewing IP Telephone Terminal Information

1. Press
2. Press
3. Press
only).
4. Press
5. Go off-hook and hang up.
20
3 6 9 Hold
+ + + (simultaneously).
#
.
Table
LEDS
FB2 FB1
ON ON
ON OFF
OFF ON
OFF OFF
ON ON
ON OFF
OFF ON
OFF OFF
Hold
to set the above data.
3 6 9 Hold
+ + + (simultaneously).
1 Hold
, then press .
FB1
to view IPT firmware version (application and boot versions, read
FB2
to view IPT MAC address (read only).
4).
Transmit Level
Level 7 (min.)
Level 6
Level 5
Level 4
Level 3 (initial value)
Level 2
Level 1
Level 0 (max.)
Strata CIX Telephones Administrator Manual 06/06