Documentation
1
memory module
2
securing clips
Installing the Memory Modules
NOTE:
If the memory module is not installed properly, the computer may not boot properly. No error message
indicates this failure.
1.
Align the notch in the module edge connector with the tab in the connector slot.
2.
Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place.
If you do not feel the click, remove the module and reinstall it.
3 of 13
http://support.dell.com/support/edocs/systems/ins5100/en/sm/upgrades.htm#1107249
2008-03-11 10:12