Floor Standing (Kx-Tde200 Only) - Panasonic KX-TDE100 Installation Manual

3.2.13 Floor Standing (KX-TDE200 Only)

Notes
• Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides
of the shelf.
• Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on
the back of the shelf will not be blocked.
• Make sure that the surface behind the shelf is not made of wood.
• Be careful not to drop the shelf.
1.
Install 4 anchor plugs in the floor, using the metal bracket as a template. Fix the metal bracket with 4
screws (A).
Anchor
Plug
2.
Remove the front cover of the shelf (refer to "3.2.3 Opening/Closing the Front Cover").
Screw (A)
TOP
Floor
Metal Bracket
Hammer
Anchor
Plug
30 mm
8 mm
3.2 Installation of the PBX
Screw (A)
Metal
Bracket
Installation Manual 77