Floor Standing (Kx-Tda200 Only) - Panasonic KX-TDA100 Installation Manual

2.2 Installation of the Hybrid IP-PBX

2.2.12 Floor Standing (KX-TDA200 Only)

Notes
• Do not block the openings of the shelf. Allow space of at least 20 cm (8 in) above and 10 cm (4 in)
at the sides of the shelf.
• Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on
the back of the shelf will not be blocked.
• Make sure that the surface behind the shelf is not made of wood.
• Be careful not to drop the shelf.
1.
Install 4 anchor plugs in the floor, using the metal bracket as a template. Fix the metal bracket with 4
screws (A).
Anchor
Plug
2.
Remove the front cover of the shelf (refer to "2.2.3 Opening/Closing the Front Cover").
64 Installation Manual
Screw (A)
TOP
Floor
Metal Bracket
Hammer
Anchor
Plug
30 mm
(1-3/16 in)
8 mm
(5/16 in)
Screw (A)
Metal
Bracket