Panasonic KX-TDE100 Installation Manual page 166

3.9 Connection of DECT Portable Stations
4.
After setting the DIP switch, connect the CS to an AC adaptor/battery box using a power supply adaptor,
or connect to a CSIF/DLC/DHLC card.
Notes
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it
to become disconnected.
• For users in the United Kingdom:
240 V AC must not be used on a building site. Instead of an AC adaptor, connect a battery box to
the CS.
• If the Power Supply Select switch is set to ON in step 3, connect the CS to an AC adaptor/battery
box. If it is set to OFF, connect the CS to a DLC/DHLC card (KX-TDA0158CE only).
KX-TDA0158CE
Modular
Telephone Cord
(PSJA1017Z)
Power Supply Adaptor
(PSZZ1TDA0142)
To AC Adaptor (KX-A11/KX-TCA1)/
Battery Box (PSZZTD142CE)
Modular
To DLC/DHLC card
5.
Install the CS temporarily for the site survey. Install the CS at least 2 m above the floor, keeping the
antennas in the upright position.
166 Installation Manual
KX-TDA0141CE/KX-TDA0142CE
Modular
Telephone Cord
Power Supply Adaptor
(PSZZ1TDA0142)
To AC Adaptor (KX-A11/KX-TCA1)/
Battery Box (PSZZTD142CE)
Modular
To CSIF/DLC/DHLC card