Procedure Overview - Panasonic KX-TDE100 Installation Manual

Pure ip-pbx
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

3.9 Connection of DECT Portable Stations
3.9.2

Procedure Overview

When connecting the wireless system, use extreme care in conducting the site survey. Site surveys can be
conducted using the KX-TCA255/KX-TCA256/KX-TCA355/KX-TD7590 PS. An incorrectly performed site
survey can result in poor service area, frequent noise, and disconnection of calls.
1. Investigate the installation site
Refer to "3.9.3 Site Planning".
a.
Obtain a map of the CS installation site.
b.
Identify the service area required by the user on the map.
c.
Plan the location of each CS, taking account of distance, building materials, etc.
2. Prepare for site survey
Refer to "3.9.4 Before Site Survey".
a.
Check and assign the CS ID number to the PS.
b.
Assign a channel number to each CS by setting the DIP switches on the back of the CS.
c.
Supply electricity to each CS using an AC adaptor/battery box or by connecting to a CSIF/DLC/
DHLC card.
d.
Install each CS temporarily as planned.
Notes
Install at least 2 m above the floor.
Keep the antennas in the upright position.
3. Conduct the site survey
Refer to "3.9.5 Site Survey Using the KX-TCA255/KX-TCA256/KX-TCA355/KX-TD7590".
a.
Test the radio signal strength using the PS.
Confirm that the radio signal strength level is "12" near the CS.
Using the KX-TCA255/KX-TCA256/KX-TCA355
Press 1, 9, and POWER
for more than 2 seconds.
Using the KX-TD7590
Press 1, 9, and POWER
for more than 5 seconds.
b.
By walking away from the CS with the PS, check the radio signal strength. The radio signal strength
weakens as you walk away from the CS.
c.
Map the CS coverage area at radio signal strength levels "3" and "8".
d.
Make sure that adjacent CS coverage areas overlap where the radio signal strength level is "8" by
at least 5 m.
156
Installation Manual
Display example:
To survey
specific channel
RADIO STRENGTH
Channel No.
<<< MEASURING >>>
0 to 9
To survey
specific channel
Display example:
Channel No.
RADIO STRENGTH
<<< MEASURING >>>
0 to 9
RADIO STRENGTH
CH0 SLOT:06 SYNC
L:12
0000/0100
CS-ID:9005301234
CH0 SLOT:06 SYNC
L:12 0000/0100
CS-ID:9005301234

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200

Table of Contents