Page: 71
Service Guide ML390/391
Chapter 3 Maintenance & Disassembly
3.2.27 Sensor Lever
· Perform these procedures:
3.2.01
,3.2.02
, 3.2.04
, 3.2.05
, 3.2.06
, 3.2.20, 3.2.22
, 3.2.25
3.2.26
.
· Turn the sensor lever (1) clockwise until it is horizontal.
· Lift the sensor lever from the shaft bearing (2).
· Work the sensor lever from the guide hole (3) in the chassis and remove the lever.
P/N 53489001 Lever: Sensor All RSPL A B C
B.2.05 , B.2.07
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)