Handling Precautions - Canon Selphy CP780 Printer User Manual

• If Ihe paper IS not feeding correctly Inlo SELPHY remove the paper cassette and any paper stuck
Ins,de SELPHY Then reinsert the paper cassette.
p
• If the paper WIll not come out even when the power
IS
tumed off and back on, contact a Canon
Customer Support Help Desk.
• Was paper left at the back of SELPHY dUring pnnting?
• Remove and reinsert the color ink cassette. However, if you cannot remove
the
color
Ink cassette. contact a Canon Cuslomer Support Help Desk.
• Image types thai are not supported cannol be pnnted.
to the original screen.
Press the O(BACK) button 10 retum
Press the O(BACK) button 10 restore the
• c.,
m"lunication error'
• SELPHY cannot connect 10 the mobile phone.
original screen
• Ie
• Check to see If the memory card IS property Inserted all the way Inlo the slot 14
• Make sure you are using a supported Image type.
• Turn the printer's power off and tum it on again. If the error message contmues to display, contact
a Canon Customer Support center for assistance.
Handling Precautions
J
- - - - - - - - _ /
Do
not apply excessive force to the printer Force or Impact on the printer may result in paper Jams
or equipment damage.
• Do not lum the power on and 011 repeatedly when you do not intend to print.
The imtializatlon process consumes 10k and the eqUivalent of several pages could be wasted.
Be careful not to spray the equipment with insecticides or volatile substances. In addition, do not
store the eqUipment In contacl with rubber or vinyl products for long penods of lime This may cause
alteration of the casing.
Depending on the room temperature. SELPHY may overheat and temporanly stop operallng This
is not a malfunction. SElPHY will resume normal printing as soon as it cools down. Temporary
stoppages increase printing time and are most likely to occur when pnnting continuously, If a room
is unusually warm, if the air vents on the back of SELPHY are blocked and internal temperature is
high.
Avoid condensation on the eqUipment when moving It from a cold to a hot place, by putting it in
an airtight. sealable plast,c bag and allow for adjustment to lemperature changes gradually before
removmg from the bag. In the event that condensation does form WIthin the eqUipment, keep It at
room temperature unlJl the water droplets evaporate naturally before use.
When SELPHY gets dIrty. WIpe the casing With a soft dry cloth.
When dust or dirt has accumulated on the battery cover or vent ,
be
sure to remove the
color Ink cassette before cleaning. If dusl gets In through the vent. the prlnler may not print
cleanly.
CD
Never wipe usmg volatile solvents such as benzlne, paint thinner, or diluted neutral solvent They
may cause deformation or peehng of the
ca~ng
33