Table of Contents
Advertisement
Using the self-cleaning oven.
The oven door must be closed and all controls set correctly for the cycle to work properly.
20
How to Delay the Start of Cleaning
Make sure the clock shows the correct time
of day.
Touch the SELF CLEAN pad.
Using the + or – pads, enter the
desired clean time.
Touch the DELAY START pad. The
earliest start time you can set will
appear in the display.
Using the + or – pads, enter the time
of day you want the clean cycle to start.
Touch the START pad.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the
oven cools.
If white spots remain, remove them with a soap-
filled scouring pad and rinse thoroughly with
a vinegar and water mixture.
These deposits are usually a salt residue
that cannot be removed by the clean cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until the
temperature drops below the lock
temperature and the LOCKED door light
goes off.
When the LOCKED door light is off, open
the door.
■
You cannot set the oven for cooking until
the oven is cool enough for the door
to unlock.
■
While the oven is self-cleaning, you can
touch the TIMER/CLOCK pad to display
the time of day. To return to the clean
countdown, touch the COOKING TIME pad.
■
If the racks become hard to slide,
apply a small amount of vegetable oil or
cooking oil to a paper towel and wipe
the edges of the oven racks with the
paper towel.
Advertisement
Table of Contents
