Unpacking The Equipment - Garmin GNS 480 Installation Manual

General Information
The database on the GNS 480 database card is generated from current Jeppesen-Sanderson data and
converted to a format that is used by the GNS 480. The data conversion process is performed using
software that is developed and maintained under Garmin AT configuration management according to
RTCA/DO-200A, Standards for Processing Aeronautical Data.
GNS 480 users update their database card by purchasing database subscription updates from Jeppesen-
Sanderson. The database card is programmed using the supplied CompactFlash memory card R/W and
Jeppesen-provided software. Contact Jeppesen at 800-621-5377 or www.jeppesen.com for more
information and instructions.
Contact Garmin AT, Inc. for information on databases available for the GNS 480.
Do not insert or remove the data card within 10 seconds after the GNS 480 is
turned on.
1.6 U
NPACKING THE
Carefully unpack the equipment. Visually inspect the package contents for any evidence of shipping
damage. Retain all shipping containers and packaging material in case reshipment is necessary.
1-16
CAUTION
E
QUIPMENT
560-0982-01 Rev A GNS 480 (CNX80) Installation Manual