Electronic Board Operations Check - Panasonic UB-7325 Installation Manual

Assembling the Electronic Board
4
Connect the power cord.
1) Securely fit the supplied power cord into the
AC inlet on the printer unit.
2) Fit the power cord into the cable holder.
5
Wipe the screen film surface.
Soak a soft cloth with water, wring well, and
wipe the screen film surface.
Caution
• Do not wipe the screen film surface with paint
thinner, benzene, or cleaners that contain abrasives.
Doing so may cause discoloration.
• Do not wipe the screen film surface with a dry cloth.
Doing so may create static electricity.
6
6
Cable holder
Check operations.
Refer to "Electronic Board Operations
Check" on page 7.