Table of Contents
Advertisement
Replacement of Parts - Page 17
11.6.
Gas Tap
a) Perform General Access - 11.1.
b) Pull the control knob off the gas tap.
c) Remove the 2 screws securing the bezel around the tap. Remove the bezel.
d) Pull the electrode lead off the piezo unit.
e) Unscrew the thermocouple from the rear of the gas tap.
f)
Disconnect the 3 union nuts at the gas tap.
g) Remove the 2 gas tap screws and withdraw the gas tap.
Notes on re-assembly - Ensure the electrode lead is positively located. The thermocouple connection need only be finger
tight and a quarter turn.
i)
Check for gas soundness and correct operation of the fire.
Hide quick links:
Advertisement
Table of Contents
