Introduction - Sharp FO-10 Operation Manual

Introduction

Automatic dialing
Fax paper
Paper cutting method
Modem speed
Transmission time*
Resolution
Automatic document
feeder
Haftone (grayscale)
Note: This fascismile machine is Year 2000 compliant.
*Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode,
excluding time for protocol signals (i.e., ITU-T phase C time only).
Welcome, and thank you for
choosing a Sharp facsimile
machine! The features and
specifications of your new Sharp
fax machine are shown below.
Rapid Key Dialing: 5 numbers
(Note for FO-10: Rapid Key Dialling is not
avaiable)
Speed Dialing: 35 numbers
(Note for FO-10: 10 numbers)
Initial starter roll (included with machine):
10 m
Recommended replacement roll:
FO-20PRw, 30 m (12.7mm core)
FO-10/FO-50: Tear off by hand
FO-70: Automatic cutter
9600 bps with automatic fallback to lower
speeds.
Approx. 15 seconds
Horizontal: 8 pels/mm
Vertical:
Standard: 3.85 lines/mm
Fine /Halftone: 7.7 lines/mm
Super fine: 15.4 lines/mm
5 pages max. (20 lb paper)
(Note for FO-10: This function is not
available)
64 levels
1