Table of Contents
Advertisement
Set Web/SNMP card control group
To use BOOTP/DHCP, Telnet, or secure HTTP to configure, control, update, or
manage the Web/SNMP card, you must enable or disable certain control
parameters. Select option 2 to modify the parameters.
Notes:
1. To prevent unauthorized viewing of the Web pages that are displayed by the
2. To obtain an IP address using BOOTP/DHCP (instead of serial configuration),
Set write access managers
To use an SNMP-compatible NMS to manage the Web/SNMP card, you must add
the IP address of the management station to the list on the Web/SNMP card to
receive read (get) or write (set) access rights. Select option 3 to add or delete the
IP address of the management station. Community strings might be different for
read or write access.
Set trap receivers
To use an SNMP-compatible NMS to manage the Web/SNMP card, you must add
the IP address of the workstation intended to be the trap receiver to the list on the
Web/SNMP Card. Select option 3 to add or delete the IP address of the trap
receivers. You can modify this information through the HTTP interface after the card
is connected to the network.
Set IP addresses of primary and secondary date server
Computer systems with the Web/SNMP card-compatible NetWatch client software
are periodically monitored by the Web/SNMP card to maintain a consistent date and
time with your network. The IP address of the computer must be listed as the
primary or secondary date server. To set the IP addresses of the primary and
secondary date servers, select option 5. You can modify this information through the
HTTP interface after the card is connected to the network.
UPS event actions
To configure actions that the Web/SNMP card performs during an ac power failure
and low battery events, select option 6. You can modify this information through the
HTTP interface after the card is connected to the network.
30
UPS 3000 LV and UPS3000 HV: Installation and Maintenance Guide
Table 4. Web/SNMP card configuration parameters with examples (continued)
Menu option
number
Function
4
sysContact
5
sysName
6
sysLocation
Web/SNMP Card, use option 2 to enable HTTP Security Control.
set DIP Switch 2 on the front panel of the Web/SNMP card to the On position
(Off is the default).
Description
System contact string of MIB (up
to 127 characters)
System name parameter for MIB
(up to 127 characters
System location parameter for
MIB (up to 127 characters)
Example
Powerware
Web/SNMP card
TEST LAB
Hide quick links:
Advertisement
Table of Contents
