Currys Essentials CDW60W10 Instruction Manual page 29

Freestanding dishwasher
Table of Contents

Advertisement

Other means for disconnection from the supply must be incorporated in the fixed wiring with at least
3mm contact separation in all poles.
The door should not be left in the open position since this could present a tripping hazard.
For energy saving, always remember to switch the dishwasher off when you have finished using it. The
dishwasher should not be left unattended when in use.
Remove the door to the washing compartment when removing an old dishwasher from service or
discarding it.
During installation, the power supply cord must not be excessively or dangerously bent or flattened.
Do not tamper with controls.
The appliance is to be connected to the water mains using new hose sets.
The maximum number of place settings to be washed is 12.
The maximum permissible inlet water pressure is 1Mpa, and the minimum permissible inlet water
pressure is 0.04Mpa.
Earthing Instructions
WARNING: THIS APPLIANCE MUST BE EARTHED.
• Improper connection of the equipment-earthing conductor could result in a risk of electric
shock.
• The wires in the cord are coloured as follows:
• Green and Yellow = Earth,
• Blue = Neutral,
• Brown = Live.
• Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed or the plug does not fit correctly.
• Never modify the plug provided with the appliance.
CDW60W10_IB_110324.indd 29
This appliance is equipped with a mains cable having an equipment-earthing conductor
and an earthing plug.
The plug must be plugged into an appropriate outlet that is installed and earthed in
accordance with local standards and requirements.
GB-29
24/03/2011 10:27 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdw45Cdw10Cdw45w10

Table of Contents