Subaru LEGACY 2004 Service Manual page 538

5. Crankshaft Position Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the bolt which installs crankshaft posi-
tion sensor to cylinder block.
3) Remove the crankshaft position sensor, and dis-
connect the connector from it.
Crankshaft Position Sensor
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
IN-00203
FU-00056
FU-00057
FU(H4SO 2.5)-21
FUEL INJECTION (FUEL SYSTEMS)
⋅
T: 6.4 N m (0.65 kgf-m, 4.7 ft-lb)
T
FU-00058