Engine Coolant Temperature - Subaru LEGACY 2004 Service Manual

Engine Coolant Temperature Sensor
FUEL INJECTION (FUEL SYSTEMS)

4. Engine Coolant Temperature

Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
IN-00203
2) Remove the generator. <Ref. to SC(H4SO 2.0)-
14, REMOVAL, Generator.>
3) Disconnect the connectors from engine coolant
temperature sensor.
FU-00055
4) Remove the engine coolant temperature sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
18 N m (1.8 kgf-m, 13.0 ft-lb)
FU(H4SO 2.5)-20