17) Install the fuel pipe protector RH.
Tightening torque:
⋅
19 N
m (1.9 kgf-m, 13.7 ft-lb)
18) Install the fuel pipe protector LH.
Tightening torque:
⋅
19 N
m (1.9 kgf-m, 13.7 ft-lb)
19) Connect the pressure regulator vacuum hose
(A) to intake manifold.
(A)
20) Install the PCV pipe. (EC, EK and K4 model)
Intake Manifold
21) Install the EGR valve. (EC, EK and K4 model)
<Ref. to FU(H4SO 2.5)-30, INSTALLATION, EGR
Valve.>
22) Install the throttle body to intake manifold.
<Ref. to FU(H4SO 2.5)-11, INSTALLATION,
Throttle Body.>
23) Install the ignition coil & ignitor ASSY. <Ref. to
IG(H4SO 2.0)-8, INSTALLATION, Ignition Coil &
Ignitor ASSY.>
24) Install the engine ground terminal to intake
manifold.
Tightening torque:
19 N
FU-01094
E: INSPECTION
Make sure the fuel pipe and fuel hoses are not
damaged and the connections are tightened firmly.
FU-01093
FU-01092
FU-01091
FU(H4SO 2.5)-19
FUEL INJECTION (FUEL SYSTEMS)
⋅
m (1.9 kgf-m, 13.7 ft-lb)
FU-01090