Removing The Rear Case Assy - FujiFilm FinePix A400 Service Manual

2. Disassembly
2-2.

Removing the REAR CASE ASSY

(1) Remove the 4 special screws (M1.7 x 5.0).
(2) Remove the 2 screws (M1.7 x 3.0).
(3) Lift up the REAR CASE in the direction of the arrow.
(4) Remove the REAR CASE ASSY in the direction of the
arrow.
(5) Peel off the FLASH SHEET and discharge the main
capacitor.
Take care not to touch the SUB PWB ASSY before
discharging the capacitor.
(6) Unlock the CN501 connector.
(7) Remove the LCD in the direction of the arrow and
remove the REAR CASE ASSY.
[Assembly]
Assemble by performing the disassembly procedure in
reverse.
[Notes]
(1) Fit the VIDEO OUT side first and then fit the strap
side.
(2) Run the wires so that they do not pinch the LCD.
14
FinePix A400 Service Manual
2
2
1
5
6
7
1
4
3
1
2