Charge The Battery; Switch The Device On And Off - Nokia 6300 User Manual

Hide thumbs Also See for 6300:
Table of Contents

Advertisement

G e t s t a r t e d

Charge the battery

Check the model number of any charger before use with this device. This device
is intended for use when supplied with power from the AC-3 or AC-4 charger.
Warning: Use only batteries, chargers, and enhancements approved
by Nokia for use with this particular model. The use of any other types
may invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull the
plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the socket on
the bottom of your device.
If the battery is completely discharged, it may take a
few minutes before the charging indicator appears on
the display or before any calls can be made.
The charging time depends on the charger used. Charging a BL-4C battery with
the AC-3 charger takes approximately 2 hours and 45 minutes while the device
is in the standby mode.

Switch the device on and off

To switch the device on or off, press and hold the power key. See "Keys and
parts," p. 18.
If the device prompts for a PIN or a UPIN code, enter the code (displayed as
****), and select OK.
The device may prompt you to set the time and date. Enter the local time, select
the time zone of your location in terms of the time difference with respect to
Greenwich mean time (GMT), and enter the date. See "Time and
date," p. 51.
When you switch on your device for the first time and the device is in the
standby mode, you may be prompted to get the configuration settings from
16

Advertisement

Table of Contents
loading

Table of Contents