Insert A Microsd Card; Remove The Microsd Card - Nokia 6300 User Manual

3. Observe the battery contacts (6),
and insert the battery (7). Slide
the back cover into its place (8).

Insert a microSD card

Use only compatible microSD cards approved by Nokia for use with this device.
Nokia uses approved industry standards for memory cards, but some brands
may not be fully compatible with this device. Incompatible cards may damage
the card and the device and corrupt data stored on the card.
1. Remove the back cover of the device.
2. Insert the card into the microSD card slot with the
contact surface facing down, and press it until it
locks into place.
3. Close the back cover of the device.

Remove the microSD card

Important: Do not remove the memory card in the middle of an
operation when the card is being accessed. Removing the card in the
middle of an operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
You can remove or replace the microSD card during phone operation without
switching the device off.
1. Make sure that no application is currently accessing the microSD memory
card.
2. Remove the back cover of the device.
3. Press the microSD card slightly in to release the lock.
4. Remove the microSD card from the slot.
G e t s t a r t e d
15