Configuration - Nokia 6300 User Manual

Text phone — Select
headset or loopset settings.
If your device is provided with a hearing aid coil, select
hrng. aid mode
aid. is shown when

Configuration

You can configure your device with settings that are required for certain
services. Your service provider may also send you these settings. See
"Configuration setting service," p. 12.
Select Menu Settings
>
Default config. sett.
To set the configuration settings of the service provider as default settings,
select Options
Activ. def. in all apps.
supported applications
Preferred access pt.
point, and select
data bearer, and packet data access point or GSM dial-up number.
Connect to support
service provider
Device manager sett.
software updates. This option may not be available, depending on your
device. See "Software updates over the air," p. 61.
Personal config. sett.
services and to activate or delete them. To add a new personal account if
you have not added any, select Add; otherwise, select
new. Select the service type, and select and enter each of the required
parameters. The parameters differ according to the selected service type. To
delete or activate a personal account, scroll to it, and select
Delete or Activate.
Use text phone
On to optimize the sound quality when using a t-coil hearing
>
T-coil hrng. aid mode
Configuration
>
— to view the service providers saved in the device.
Set as default.
>
— to activate the default configuration settings for
— to view the saved access points. Scroll to an access
Options Details
>
— to download the configuration settings from your
— to allow or prevent the device from receiving
— to manually add new personal accounts for various
Yes to use this settings instead of
>
is active.
and from the following options:
to view the name of the service provider,
S e t t i n g s
Hearing aid T-coil
>
Options Add
>
Options
>
59