Draytek Vigor2960 Series User Manual page 220

Item
Authentication Type
LDAP Profiles
White IP List
Apply
Cancel
4 . 6 . 1 . 2 U s e r - B a s e
4 . 6 . 1 . 2 U s e r - B a s e
The User-Based Firewall Status is a monitoring tool which only works after you choose
User_Based as the Mode setting on User Management>>General Setup.
User authentication setup will launch if the router is running in User_Based mode. The
User-based Firewall Status will start to record each authentication event of specified users
including authentication failure or success, user's IP, when or how much time the user uses,
and how much rest time for the user.
Description
involved.
User-Based - If you choose such mode, the router will apply
the filter rules configured in User Management>>User
Profile to the users.
Rule-Based –If you choose such mode, the router will apply
the filter rules configured in Firewall>>Filter Setup to the
users.
Under User_Based mode, please specify the authentication
type.
It is available when LDAP is selected as Authentication
Type.
You have to specify one profile from the drop down list for
authentication.
Under User_Based mode, check the IP object and/or IP
group profiles you want.
Click it to save the configuration.
Click it to discard the settings configured in this page.
d F i r e w a l l S t a t u s
d F i r e w a l l S t a t u s
212
Vigor2960 Series User's Guide