ViewSonic VE710b-4 Service Manual page 36

Procedure of Disassembly (VE710s-4/VE710b-4/VA721)
This section provides disassembly procedures for VE710s-4/VE710b-4/VA721 LCD Monitor. Before
you begin any of these procedures, be sure to turn off the power, computer system, and other attached
devices; then disconnect the power cable from the electronically outlet. Moreover, when you
disassemble the monitor, be sure to put the screws in a safe place and separate them according to
grouping.
Disassembly of Stand unit from Monitor
Hinge Cover
Hinge Cover
!
!
"
X4
2080004800
1. Remove two Hinge Cover.
2. Unscrew four screws that secure Stand unit.
33
ViewSonic Corporation
VE710s-4_VE710b-4
Confidential - Do Not Copy