Service Manual ViewSonic VE710s/b-21 VA721 Model No. VS10047 17” Color TFT LCD Display (VE710s/b-2_VA721_SM_770 Rev. 1a Mar. 2004) ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583...
Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes.
3. Keep wires away from high voltage, high temperature components and sharp edges. 4. Keep wires in their original position so as to reduce interference. 5. Please refer to user's manual for additional instructions on using this product. Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Green = ON Contrast adjustment control Orange = Power Saving screen. Also a shortcut to Auto Image Adjust. Displays the Main Menu Power or exits the control screen On/Off and saves adjustments. Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 8
• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible . (The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD dislay.) Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 9
— Adds red to the screen image for warmer white and 6500K richer red. Default setting. — Adds green to the screen image for a darker color. 5400K Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 10
Vertical moves the screen image up and down. (Horizontal Size) adjusts the width of the screen image. H. Size Vertical size is automatic with your LCD dislay. NOTE: Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 11
OSD Timeout screen is displayed. For example, with a “15 second” setting, if a control is not pushed within 15 seconds, the display screen disappears. Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
BIN0M Analog Input Reference ground for analog blue input 57 REXT External resistor 390 ohm to AVDD 52 RSDS Interface Pin Name Pin Type Function Pin CLKAP Output A-Link Positive RSDS Differential Clock Output from“Odd” Channel 118 Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 14
AVDD 3.3V Power ADC Power 45, 51, 55, 65 AVSS Ground ADC Ground 39, 42, 48, 56, 64, 68 AVDD_PLL 3.3V Power PLL Power 53 AVSS_PLL Ground PLL Ground 54 AVDD_MPLL 3.3V Power MPLL Power 35 Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 15
Input Current, High (IIH) -1.0 uA Input Current, Low (IIL) 1.0 uA Input Capacitance 5 pF DIGITAL OUTPUTS Output Voltage, High (VOH) VDDP-0.1 V Output Voltage, Low (VOL) 0.1 V DYNAMIC PERFORMANCE Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 16
There are two signal to control the inverter which come from system; Logic “high” level which send to I901 is turn on the inverter. BRI signal control brightness by DC level which was integral from PWM signal Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
(2) Press “ ¡¶ ” key move cursor to “White Balance”, Press key do white balance adjustment. (3) Press “ ¡¿ ” key move cursor to “Color Temerature Adjust”, Press key, Then OSD will display Fig.2 Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 18
(b). Change to each mode in turn and wait for the monitor finish auto-alignment and save process before change to next mode. (c). After all of the modes are adjusted, exit OSD menu and press PWR OFF to exit factory mode. Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
CHECK 5V OK? POWER PCB CHECK CHECK I103, I106,I107 3.3V OK? SURROUND CAP SURROUND CAP BEAD OK? CHECK CHECK I104, I101, 1.8V OK? SURROUND CAP SURROUND CAP BEAD OK? BEAD OK? Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Page 20
? Check X101 Crystal 14.318MHz is Change X101 working ? Check I105 Change I105 LCD Pin#70,71 data bus controller IC have signal Check panel Powers VLCD_3V3 VLCD_12V correct Change LCD panel Confidential - Do Not Copy ViewSonic Corporation VE710s/b-2 VA721...
Add.: Fax: Tel: E-mail: After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile 1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes (marc.maupin@viewsonic.com) Confidential - Do Not Copy...