Ricoh B234 Service Manual page 470

SERVICE CALL CONDITIONS
792-13 D Pre-bind jogger shutter error
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
792-14 D 50/100 clamp adjustment error
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
792-15 D Timing sensor interval error
The bind timing sensor (S702)
remained ON or OFF longer than
the prescribed time (1500 ms)
during initialization or ring binding
(1st detection: jam, 2nd detection:
SC error)
792-16 D Clamp unit HP error
At initialization or during ring binding,
did not arrive at the home position
within the prescribed time (1500 ms)
(1st detection: jam, 2nd detection: SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 1500 ms) (1st
detection, jam, 2nd detection, SC
error)
B234/B235/B236/D101/D102/D103
• Shutter motor (M608) connector
loose, broken, defective
• Motor overload
• Motor defective
• Shutter HP sensor (S605) connector
loose, broken, defective
• Sensor defective
• 50/100 adjustment motor (M702)
connector loose, broken, defective
• Motor overload
• Motor defective
• Ring switch HP sensor (S706)
connector loose, broken, defective, or
sensor defective
• Ring switch timing sensor (S707)
connector loose, broken, defective, or
sensor defective
• Clamp unit motor (M701) connector
loose, broken, defective
• Motor overload
• Motor defective
• Bind timing sensor (S702) connector
loose, broken, defective
• Sensor defective
• Clamp unit motor (M701) connector
loose, broken, defective
• Motor overload
• Motor defective
• Clamp unit HP sensor (S701)
connector loose, broken, defective
• Sensor defective
4-50 SM