Brother QL-650TD User Manual page 55

Label printer
Hide thumbs Also See for QL-650TD:
Table of Contents

Advertisement

Available languages

Available languages

Problem
Is the cutter blade getting dull?
Does the cutter error occur frequently?
Labels are
Replace the cutter unit. For details, refer to
jammed in the
unit" in page 50.
cutter or are
Is there dirt or lint on the roller preventing it from rolling freely?
not ejected
Clean the roller using the cleaning sheet. For details, refer to
correctly after
printing.
Is the label outlet stained?
Remove stains from the label outlet. For details, refer to
outlet maintenance" in page 49.
Is Microsoft
The Add-in
Is Microsoft
feature icon is
Outlook
not displayed
Due to program limitations, the Add-in feature of Microsoft
®
on Microsoft
unable to be used with the above settings. Quit Microsoft
Word.
and restart Microsoft
I would like to
Reset the printer.
clear the
With the power supply off, press the ON/OFF button while at the
printer settings
same time holding the Up arrow button and Feed button. The printer
and the data
is reset and its settings and data transferred from the PC is deleted.
transferred
The clock and date settings will not be affected.
from the PC.
Error messages
Error message
A system error occurs.
System Error
No.*!
The DK Roll cover is open.
Please Close
Cover!
The cutter is not set to the home
position.
Cutter Error!
The DK Roll is not fed properly.
Paper Cannot
Or, the DK Tape has run out.
be Fed!
The DK Label has run out.
Roll End!
Printing or cutting is operated
Please Insert
Label Roll!
without installing DK Roll.
"Roller maintenance" in page 48.
®
Word started up from Microsoft
®
Word chosen for the editor usually used for Microsoft
®
?
®
Cause
Solution
Word.
Contact your service representative.
Close the DK Roll cover and do
the operation over again.
Turn off the printer, and then turn
the printer on again.
If the problem cannot be
corrected, contact your service
representative.
Set the DK Roll properly again. If
the DK Tape has run out, insert a
new roll.
Insert a new DK label roll.
Install the DK Roll.
"Replacing the cutter
"Label
®
®
Outlook
?
®
Word is
®
Outlook
Solution
55
STEP
1
®
®
,
STEP
2
STEP
3

Advertisement

Table of Contents
loading

Table of Contents