Brother QL-650TD User Manual page 13

•
When applying CD/DVD labels, use the applicator included with the CD/DVD label rolls.
failure to do so could cause damage to the CD/DVD player.
•
Users shall take full responsibility for applying CD/DVD labels. Brother accepts no
responsibility for any loss or damage of data caused by the inappropriate use of CD/DVD
labels.
CD-ROM and Software
•
Do not scratch or subject the CD-ROM to high or low temperatures.
•
Do not put heavy objects on the CD-ROM or apply force to the CD-ROM.
•
The software contained on the CD-ROM is meant for use with the machine only. See the
License on the CD for details. This software may be installed on multiple computers for
use in an office, etc.
Battery
•
Do not use included battery to other products.
•
Dispose in accordance with all applicable federal, state,
and local regulations.
•
When storing or discarding the battery, wrap it with
adhesive cellophane tape etc. to prevent the short circuit of
battery.
•
It is recommended to replace the battery every two years.
This product contains a CR Coin Lithium Battery which
contains Perchlorate Material. Special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Cutter
•
The average number of cuts is 5,000 or more depending on the operating environment.
Dull cut, the inability to cut straight, or frequent paper jams may indicate that the cutter
life is near the end. Replace the cutter if these conditions occur.
Example of grounding of battery
Adhesive cellophane tape etc.
Battery
13
STEP
1
STEP
2
STEP
3