Toshiba E-studio3511 Operator's Manual page 95

Network Operator's Guide — TopAccess Errors
Error Code
Power failure occurred during
2BD0 e-Filing restoring.
Failed to get machine parameter.
2BE0
Maximum number of pages has
2BF0
been exceeded (list maximum).
Maximum number of documents
2BF1 has been exceeded (list maxi-
mum).
Maximum number of folders has
2BF2
been exceeded (list maximum).
RFC related
Syntax error, command unrecog-
nized
2500
Syntax error in parameters or
arguments
2501
Bad sequence of commands
2503
Command parameter not imple-
mented
2504
Mailbox unavailable
2550
User not local
2551
Message
Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
Turn the power OFF and then back ON.
Retry the scan.
Reduce the pages and print again.
Delete the documents from the boxes or
folders.
Delete the folders from the boxes.
Check if the Terminal mail address and
Destination mail address are correct.
Check if the mail server is operating prop-
erly. Turn the power OFF and then back
ON. Perform the job in error again.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service repre-
sentative.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service repre-
sentative.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service repre-
sentative.
Check the state of the mail box in the mail
server.
Check if the mail server is operating prop-
erly.
Turn the power OFF and the back ON.
Perform the job in error again. If the error
still occurs, Contact your service repre-
sentative.
Corrective Action
95