Toshiba E-studio3511 Operator's Manual page 88
Multifunctional digital system
Hide thumbs
Also See for E-studio3511:
- Service handbook (552 pages) ,
- Manual (342 pages) ,
- Operator's manual (313 pages)
Table of Contents
Advertisement
88
Error Code
Directory creation failure
1C30
File creation failure
1C31
File deletion failure
1C32
File access failure
1C33
Image conversion abnormality
1C40
HDD full failure during processing
1C60
Address Book reading failure
1C61
Memory acquiring failure
1C62
Terminal IP address unset
1C63
Terminal mail address unset
1C64
SMTP address unset
1C65
Server time time-out error
1C66
NIC time time-out error
1C67
Cause
Check if the access privilege to the
storage directory is writable. Check
if the server or local disk has a suffi-
cient space in disk capacity.
Check if the access privilege to the
storage directory is writable. Check
if the server or local disk has a suffi-
cient space in disk capacity.
Turn the power OFF and then back
ON. Perform the job in error again. If
the error still occurs, contact your ser-
vice representative.
Check if the access privilege to the
storage directory is writable. Check
if the server or local disk has a suffi-
cient space in disk capacity.
Turn the power OFF and then back
ON. Perform the job in error again. If
the error still occurs, contact your ser-
vice representative.
Reduce the number of pages of the
job in error and perform the job
again. Check if the server or local
disk has a sufficient space in disk
capacity.
Turn the power OFF and then back
ON. Perform the job in error again.
Reset the data in the Address Book
and perform the job again.
If the error still occurs, contact your
service representative.
Turn the power OFF and then back
ON. Perform the job in error again. If
the error still occurs, contact your ser-
vice representative.
Ask your administrator to set the IP
address of the equipment.
Ask your administrator to set the
E-mail address of the equipment.
Ask your administrator to set the
SMTP server address.
Check if the SMTP server is operat-
ing properly.
Turn the power OFF and then back
ON. Perform the job in error again. If
the error still occurs, contact your ser-
vice representative.
Network Operator's Guide — TopAccess Errors
Corrective Action
Advertisement
Table of Contents
