Toshiba E-studio3511 Operator's Manual page 92

92
Error Code
Failed to create file
2C31, 2C33
Failed to delete file
2C32
Failed to convert image file format Turn the power OFF and then back ON.
2C40
Failed to read AddressBook
2C61
Invalid Domain Address
2C63, 2C64
Failed to connect to SMTP server
2C65, 2C66,
2C69
Failed to send E-Mail message
2C67, 2C68,
2C6A
Invalid address specified in From:
field
2C6B
Invalid address specified in To:
field
2C6C
2C6D NIC system error
SMTP service is not available
2C70
Failed to process received Email
2C80
job
Failed to process received Fax job Ask your administrator whether the Fax
2C81
2CC0 Job canceled
Power failure occurred
2CC1
Save as file
2D10, 2D12, Illegal Job status
2D13,
2D20-2D22
Message
Make sure that the access privilege to the
storage directory is writable and the
server or local disc has a sufficient space.
Then retry the scan.
Turn the power OFF and then back ON.
Retry the scan.
Retry the scan. If the error still occurs,
contact your service representative.
Turn the power OFF and then back ON.
Retry the job in error. Reset the data in
the Address Book and retry it. If the error
still occurs, contact your service represen-
tative.
Ask your administrator to set the IP
address.
Make sure the SMTP server is correctly
working, or the SMTP server address has
been set correctly.
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Make sure that there is an illegal character
in the Terminal mail address. Delete the
illegal character and reset the appropriate
Terminal mail address, then retry it.
Make sure that there is an illegal character
in the Destination mail address. Delete
the illegal character and reset the appro-
priate Destination mail address, then retry
it.
Contact your dealer for support.
Ask your administrator whether the
SMTP service is enabled.
Ask your administrator whether the Inter-
net Fax Received Forward is set.
Received Forward is set.
(Job was canceled.)
Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Network Operator's Guide — TopAccess Errors
Corrective Action