Toshiba E-studio3511 Operator's Manual page 93

Network Operator's Guide — TopAccess Errors
Error Code
Not enough memory
2D11
Invalid parameter specified
2D14, 2D61
There are too many documents in
2D15, 2D65 the folder. Failed in creating new
document.
Failed to create directory
2D30
Failed to create file
2D31, 2D33
Failed to delete file
2D32
Failed to convert image file format Turn the power OFF and then back ON.
2D40
Failed to copy file
2D60
Failed to connect to network desti-
nation. Check destination path.
2D62
Specified network path is invalid.
2D63
Check destination path.
Logon to file server failed. Check
username and password.
2D64
Failed to process your job. Insuffi-
2D66
cient disk space.
FTP service is not available
2D67
File Sharing service is not avail-
2D68
able
2DC0 Job canceled
Power failure occurred
2DC1
Store to e-Filing
2B10 There was no applicable job.
Message
Make sure there is enough memory to
save the scan job.
Make sure you specify the settings cor-
rectly and try again.
Delete the data in the local shared folder
in the equipment.
Make sure that the access privilege to the
storage directory is writable and the
server or local disc has a sufficient space.
Then retry the scan.
Make sure that the access privilege to the
storage directory is writable and the
server or local disc has a sufficient space.
Then retry the scan.
Turn the power OFF and then back ON.
Retry the scan.
Retry the scan. If the error still occurs,
contact your service representative.
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Make sure the network folder is shared in
your network and retry the scan. If the
error still occurs, ask your administrator
to confirm whether the IP address or path
of the server is correct. Also make sure
that the server is operating properly.
Make sure you specify correct network
folder and retry the scan.
Make sure you specify correct user name
and password to logon the file server, or
you specify correct file server. Then retry
the scan.
Delete the data in the local shared folder
in the equipment and retry the scan.
Ask your administrator whether the FTP
service is configured correctly.
Ask your administrator whether the SMB
protocol is enabled.
(Job was canceled.)
Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
Retry the scan.
Corrective Action
93