Wacom One CTH-671 User Manual page 35

Clicking is difficult.
Double-clicking is difficult.
The pen selects everything, or
will not stop selecting.
The eraser (when equipped)
selects everything or will not
stop erasing.
You notice a screen delay at
the beginning of pen or inking
strokes.
You have to press hard with
the pen when clicking,
drawing, or writing.
The pen tip does not function.
The screen cursor jumps
back.
The upper or lower pen button
does not work.
Contents Index
Open the tablet control panel and go to the P
T F .
IP EEL
Select the C
LICK
will enable you to hear when the pen registers a mouse click. Your
computer speakers must be turned on and the volume audible before
you can hear a click sound.
Be sure you are quickly tapping the tablet twice in the same place on
the tablet active area.
Using a pen button set to double-click is recommended (review the
techniques in clicking).
Open the tablet control panel and go to the P
• Try increasing the D
• Try using a lighter T
Windows: Try setting your system to launch programs with a single
click. See clicking.
Open the tablet control panel and go to the P
slider toward F
Open the tablet control panel and go to the P
F slider toward F
EEL
Open the tablet control panel and go to the P
D C
OUBLE LICK
Open the tablet control panel and go to the P
slider toward S
Depending on your tablet model, the status LED should brighten or
change color when the pen tip is pressed to the tablet. Be sure you are
using the pen that originally came with your product. Other pens may
not function properly on the tablet.
See testing a pen
have defective hardware.
Do not place the pen on the tablet when it is not in use or when you are
using another pointing device. Leaving your pen on the tablet may
interfere with screen cursor positioning when using other input devices.
Be sure you press the pen button when the pen tip is within 7 mm (0.28
inch) of the tablet active area. Do this without pressing down on the
pen tip.
From the tablet control panel, verify that the pen button is set to the
function you are expecting to occur.
In the tablet control panel, click on the P
C & T is selected, you will need to first press the pen button and
LICK AP
then touch the pen tip to the tablet surface in order to perform a click
function. See
See testing a pen
have defective hardware.
Contents Index
S option (the check box should be checked). This
OUND
C
OUBLE LICK
F .
IP EEL
. If this does not help, see
IRM
. If this does not help, see
IRM
D .
ISTANCE
.
OFT
to verify pen operation. If any of the tests fail you may
setting the pen button
to verify pen operation. If any of the tests fail you may
tab. Try using a lighter
EN
tab.
EN
D .
ISTANCE
tab. Move the T
EN
testing a pen.
tab. Move the E
EN
testing a
tab. Try decreasing the
EN
tab. Move the T
EN
tab A button. If
EN DVANCED
functions.
35
F
IP EEL
RASER
pen.
F
IP EEL
35