3 ] System Properties Menu - Denso BHT-202Q User Manual

[ 3 ] System Properties Menu

[3.1] QRcode
Choosing "3:System Properties" in System Menu calls up the window
shown at left.
[1] QRrcode:
[2] Beeper/Vibration:
[3] Control Panel:
[4] File System:
[5] Power Management:
[6] Key:
[7] Status Display:
[8] Radio Frequency:
On the System Properties Menu, double-tap the "QRcode", and the
QRcode property appears.
INVERT:
REVERSE:
DECODE LEVEL:
SCAN MODE:
MARKER:
OPTION DATA:
MINIMUM DIGITS:
ITF:
CODABAR:
74
Opens the QRcode menu.
Opens the Beeper/Vibration menu.
Opens the Control Panel window.
Opens the File System menu.
Opens the Power Management menu.
Opens the Key menu.
Opens the Status Display menu.
Opens the NIC Control menu.
Activates or deactivates the black-and-white
inverted label reading function.
Activates or deactivates the mirror image 2D
code reading function.
Sets the decode level.
Selects the SCAN mode.
Sets the marker ON/OFF mode.
Selects whether or not option data will be
added to the tail of 2D code data read.
Sets the default minimum number of digits to
be read for ITF.
Sets the default minimum number of digits to
be read for CODABAR.