Connection Using Activesync - Denso BHT-202Q User Manual

3.5.2 Connection Using ActiveSync

When connected by IrDA, USB, or connector interface
IrDA communication
Arrange the BHT and host PC with their IrDA ports facing directly each other as shown below.
No ActiveSync can be used for connection via the CU-200.
For the operating procedure of ActiveSync on the BHT, refer to Chapter 2, Section 2.5.4, "[2.2]
ActiveSync (IrDA)."
USB communication
Connect the BHT to the host PC by using a USB interface cable as shown below.
For the operating procedure of ActiveSync on the BHT, refer to Chapter 2, Section 2.5.4, "[2.4]
ActiveSync (USB)."
Host PC
IrDA communication
Host PC
USB interface cable
128
BHT
BHT