Components; Names And Functions - Denso BHT-202Q User Manual

2.2 Components

2.2.1 Names and Functions

Synchronization LED*
Flashes during wireless
communication.
Built-in antenna*
Do not cover this
antenna section
with metal-
evaporated tape
or by hand.
Doing so may
result in
communications
failures.
Interface port:
USB interface port
and connector
interface port
Trigger switch (M3 key)
Press this switch to start code
reading.
Reading window
Stylus
Indicator LED
Illuminates in blue when the BHT has successfully read a 2D code or bar code.
Charge LED
Illuminates in red during charging and turns green at
completion of charging.
Reset button
IrDA interface port
Used to exchange data/programs with
the host computer via its integrated IR
port or via the optical communication
unit CU-200.
Release button
Slide this button to open the
battery cartridge cover.
Touch screen LCD (liquid crystal display)
Shows the characters and graphic patterns.
You may directly tap the screen with the
stylus for data entry.
Hand belt
Battery cartridge cover
Remove this cover to replace the
battery cartridge.
16
* Provided on the BHT-202QW-CE
Trigger switch (M4 key)
Press this switch to start code
reading.
Hand strap
Be sure to put your
hand through this strap
to prevent you from
dropping the BHT
accidentally.
Charge terminals
Compact Flash card slot
Insert an optional Compact Flash
card into this memory extension
slot.
Rechargeable battery
cartridge
Main power source of the
BHT.
Release button