Brother FAX4759 Service Manual page 136

Selector
No.
1 Not used.
Time length from transmission of
2
the last dial digit to CML ON
Time length from CML ON to CNG
3
transmission
Time length from CML ON to CED
4 transmission (except for facsimile-
to-telephone switching)
5
No. of training retries
6
7
Encoding system
(Compression)
8
l Selector 2: Time length from transmission of the last dial digit to CML ON
This selector sets the time length from when the equipment transmits the last dial digit until the
CML relay comes on.
Selector 3: Time length from CML ON to CNG transmission
l
This selector sets the time length until the equipment transmits a CNG after it turns on the CML
relay.
l Selector 4: Time length from CML ON to CED transmission
This selector sets the time length until the equipment transmits a CED after it turns on the CML
relay. This setting does not apply to switching between facsimile and telephone.
Selectors 5 and 6: No. of training retries
l
These selectors set the number of training retries to be repeated before automatic fallback.
Selectors 7 and 8: Encoding system (Compression)
l l
This selector determines whether or not use of the MR/MMR coding system will be allowed.
WSW10
(Protocol definition 2)
Function
MR
MMR
V - 23
manuals4you.com manuals4you.com
Setting and Specifications
0: 100 ms 1: 50 ms
0: 2 sec. 1: 4 sec.
0: 0.5 sec. 1: 2 sec.
No. 5 6
0 0 : 1 time
0 1 : 2 times
1 0 : 3 times
1 1 : 4 times
0: Allowed 1: Not allowed
0: Allowed 1: Not allowed