Data that should be printed on the same page is printed on two separate pages.
Cause 1
Remedy
Cause 2
Remedy
Print Quality Problems
4
The printout is too light or too dark.
Cause 1
Remedy
Cause 2
Remedy
4-10
Printing Problems
The application software's "Line spacing" and "Number of lines on a page"
settings are not correct.
Change the settings so that the data fits on one page and print the data again.
(See the application software manual.)
The Timeout setting is too short, when the Personality setting is set to 'Auto'.
Change the Personality setting to a setting other than 'Auto', or increase the
Timeout setting. (See "Personality," on p. 2-29, and "Timeout," on p. 2-17.)
The toner density settings are not correct.
Adjust the toner density and print the data again. (See "Density," on p. 2-11.)
Toner Save is set to 'On'.
Set Toner Save to 'Off' and print the data again. (See "Toner Save," on p. 2-11.)