Settings Menu
Copies
1 to 9999; 1
This setting enables you to specify the number of copies printed. The default
setting is '1', but you can specify up to 9999 copies.
2-Sided Printing
On, Off
This parameter selects one-sided or two-sided printing. When 2-Sided Printing is
specified, the document is printed on both sides of the paper.
NOTE
•
Two-sided printing can use either the paper drawer or the stack bypass in sizes of
11" x 17", LGL, LTR, LTRR, STMTR, EXEC, A3, JIS-B4, A4, A4R, JIS-B5, JIS-B5R,
and A5R.
•
Two-sided printing can use paper within the following range:
- 17 lb bond to 24 lb bond (64 to 90 g/m
•
When printing on letterhead paper, or paper with a logo (such as a cover sheet),
please note the following:
- If the paper is fed from a paper drawer, the printing surface should be face down.
- If the paper is fed from the stack bypass or the optional paper deck, the printing
surface should be face up.
*
*
2
)
Settings Menu
2
2-7