Comfort And Reduced Temperature ( ) - eQ-3 MAX! Operating Manual

the display setting from nominal to acutal temperature.
• Open the configuration menu by pressing the menu button.
• Select the (S-A) menu item with the (+) and (-) buttons
and confirm with the OK button.
• Now set the format you want to show on the display („SEt"
for the nominal temperature and „ACt" for the actual tem-
perature) with the (+) and (-) buttons.
• Confirm setting with the OK button.
If the actual temperature is selected,
the display will disbplay „SEt" for 5
seconds on change of the nominal
temperature (or on change of mode).
Afterwards, the display automatically
changes back to actual temperature.
17.4 Comfort and reduced temperature (
The comfort ( ) and reduced ( ) temperature buttons
make switching between comfort and reduced temperature
simple and user friendly. The factory setting for the comfort
temperature is 21.0°C and the reduced temperature 17.0°C.
When using MAX! without Cube, the comfort and redu-
ced temperature can be changed via corresponding but-
tons as follows:
• Press the comfort ( ) / reduced ( ) temperature button
for a few seconds.
• The display shows the respective symbol and the corre-
sponding comfort or reduced temperature.
• Change the temperature with the (+) and (-) buttons.
• Confirm setting with the OK button.
)
49