Timescan - JVC HR-S8600EU Instructions Manual

20
EN

TimeScan

TIMER
STANDBY/ON
TV PROG
S-VIDEO VIDEO (MONO) L – AUDIO – R
SYNCHRO EDIT SP / LP
1
2
1
4
7
1
MENU
2
PLAY
REW
DIGITAL
TBC/NR
INSERT A.DUB
PAUSE
REC LINK
– –:– –
2 3
5 6
8 9
3
4
0
4
3
OK
TV PROG
PAUSE
Your recorder is equipped with the TimeScan function. TimeScan
allows noise free pictures to be displayed on your TV screen in
the forward and reverse search modes. Audio will be played back
at normal speed during the TimeScan modes (
TimeScan also allows you to view a programme in search mode
while listening to the audio.
NOTES:
"TIME SCAN AUDIO" must be set to "ON", or the sound will
not be heard in TimeScan mode. (
The audio will not synchronize with the video in TimeScan
modes.
During 1.5x speed TimeScan the audio playback speed will
8
also be 1.5 times normal, so dialog will sound fast-talking.
FF
In Pause mode 3 seconds (approx.) of audio will be played
back repeatedly. (
JOG
SHUTTLE
In TimeScan search modes some of the audio information will
not be played so that the audio can keep up with the video.
Audio signal during TimeScan
Playback tape
Sound of 1, 3 and 5 is heard.
Sound of 2 and 4 is not heard.
Output audio signal is normal (monaural) sound.
Variable-Speed Search
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback, turn the recorder's TIME SCAN
SHUTTLE ring. It remains at that position even after you
release it. Each time it passes a click position, the
playback speed changes.
(Refer to the chart on page 21 for playback speeds).
OR
During playback, press
The more times you press, the faster the playback
picture moves.
To decrease speed, press the button for the opposite
direction.
(Refer to the chart on page 21 for playback speeds).
To resume normal playback, press PLAY.
If the picture jitters vertically during still or variable-
speed search with a MESECAM tape:
1 Press PAUSE.
2 Press TV PROG + or – so that the vibration stops.
PLAYBACK (cont.)
pg. 21).
pg. 21)
pg. 16)
1 2 3 4 5
@ #
or .