Connecting/Using A Decoder - JVC HR-S8600EU Instructions Manual

54
EN
Connecting/
Using A
Decoder
TV Receiver
AV1 IN/OUT
S OUT
AV2 IN/DECODER
RF Cable (provided)
SYNCHRO EDIT
ANT. IN
AV1 OUT
AV1 IN/OUT
L
COMP. Y/C AUDIO
OUT
R
AV2 IN/DECODER
PAUSE/R.A. EDIT
RF OUT
Decoder
SYSTEM CONNECTIONS (cont.)
The AV2 IN/DECODER connector can be used as an input
terminal for an external decoder (descrambler). Simply connect
a decoder and you can enjoy the variety of programming that is
available through scrambled channels.
SELECT INPUT MODE
1
Set "AV2 SELECT" to "DECODER". (
CONNECT DECODER
2
Connect your recorder's AV2 IN/DECODER connector
to the decoder's Euroconnector using a 21-pin SCART
cable.
SET TUNER
3
Perform the procedure as described in "When Receiving
A Scrambled Broadcast" on page 59.
TV Aerial
Cable
JLIP
pg. 44)