North Star M157594AF.1 Owner's Manual page 24

If using feed tank:
Follow these instructions when supplying water from a feed tank:
1. Make sure you have followed all instructions provided in this manual
2. Ensure that you have the tank feed ball valve OPEN, and the city tap
3. Make sure the water in your tank is clean. Debris can cause excess
Attach high Attach the high pressure hose to the pressure washer's water outlet.
pressure hose
1. See "Machine Component Identification" section of this manual for location
2. Your pressure washer hose is equipped with quick couplers. Simply pull the
Operation
for attaching water feed tank. (See Assembly/Initial Set-Up section,
"Step 2. Attaching a Water Feed Tank".)
water ball valve CLOSED, as indicated in the diagram below.
Open this
ball valve
pump wear and reduce performance.
WARNING:
NEVER operate this pump with components (such as hose, connections,
and spray gun) rated for lower pressure and/or temperature limits than the
machine's maximum rated pressure and temperature, or component could
rupture and cause serious personal injury from escaping high pressure
fluids.
of the pressure washer's water outlet.
collar back and push the coupler onto the water outlet nipple. (Figure 8a).
The collar should slide over the ball bearings.
Coupler
Collar
High Pressure Output
Figure 8a
24
Close this ball valve