Step 5. CLOSE the city tap water ball valve and OPEN the feed tank ball valve, as shown in
Figure 4a.
Step 6. Reroute the easy start valve so it discharges back to the feed tank as shown below in
Figure 4b. (This will aid pump priming on initial start-up.)
Reroute hose to
water feed tank
The easy start valve is located below the Unloader – see "Component Identification"
section of this manual for location of Unloader.
The tank is now ready to be filled.
CAUTION
water. Use the quick couple chemical injector provided and follow all instructions and
precautions for chemical spraying see: "Operation Instructions, Step 2. Set Up for
Chemical Spray" section in this manual.
Assembly and Initial Set-Up
Unloader
Plug this
port
: To protect the pump, do not add cleaning chemicals directly to the tank
Figure 4b
13