Audio Dubbing - JVC HR-S7500U Instructions Manual

60
EN

Audio Dubbing

POWER MENU
Audio cable
Audio component
NOTES:
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the Hi-Fi or mixed sound (Hi-Fi + Normal soundtracks),
refer to the "Select The Soundtrack" section (
select the soundtrack you wish to hear.
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the VCR enters the Play mode. Check the
counter reading before dubbing.
Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
When playing back an audio-dubbed tape, refer to the "Select
The Soundtrack" section (
you wish to hear.
Picture may be distorted during Audio Dubbing Pause.
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
PAUSE
(CD player etc.)
pg. 29) and
pg. 29) to select the soundtrack
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack. Use your VCR as the
recorder.
Pre-recorded tape
– +
Audio-dubbed tape
JOG
SHUTTLE
MAKE CONNECTIONS
1
Connect an audio component to your VCR's AUDIO IN
L+ R connectors. *When connecting monaural
equipment, use only the VCR's AUDIO IN L connector.
SET RECORDER'S INPUT
MODE
2
Press the remote control's NUMBER key "0" and CH so
that "F-1" appears in place of a channel number.
LOCATE START POINT
3
Press PLAY to start playback of the tape in your VCR,
and press PAUSE when you find the point where you
want to start dubbing.
ENGAGE AUDIO DUBBING
4
Press A.DUB.
START DUBBING
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your VCR. Audio dubbing
begins at this point.
END AUDIO DUBBING
6
Press STOP to stop the tape in your VCR, and engage
the audio component's Stop mode.
EDITING (cont.)
Normal
audio track
Video/Hi-Fi
audio track
Your VCR enters the Audio Dubbing Pause mode.
( blinks, and light up on the front display
panel.)
blinks and is displayed on the front display
panel.
To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.