Vcr Plus+ Setup - JVC HR-S7500U Instructions Manual

VCR Plus+
Setup
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
POWER MENU
OK
1
4
7
1
MENU
–
SHUTTLE
POWER
2 3
2
5 6
8 9
0
4
OK
TIME SCAN
IMPORTANT
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong VCR
or CABLE CH number will be displayed on the VCR Plus+
Program screen (
perform the following steps to set the correct the Guide
Channel number for that station.
To ensure that VCR Plus+Timer Recording operates correctly it
is necessary to set the VCR Plus+ "Guide Channel Set " for each
station. Please read the following information carefully.
VCR Plus+ Guide Channel Matching
VCR Plus+ assigns a VCR Plus+ "Guide Channel" to broadcast
and cable TV channels. These Guide Channel numbers are also
called the VCR Plus+ Channel Codes. Most TV listings have a
section, usually a chart, indicating the "Guide Channel" numbers
+
assigned to each station. For accurate VCR Plus+ Programming
the VCR Plus+ Guide Channel number for each station should
match the channel number on which it is received in your area.
JOG
NOTES:
In many instances the VCR Plus+ Guide Channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your VCR or cable box.
Check your TV listing, or contact your cable supplier for
details.
Many broadcast TV stations can be viewed on cable. Check
your TV listing, or contact your cable supplier for details.
TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS INITIAL SET
SCREEN
3
Press CH 5 ∞ or TIME
SCAN % fi to move the
highlight bar (arrow) to
"INITIAL SET", then press
OK or TIME SCAN
step 5 on page 46). When this happens,
MAIN MENU
FUNCTION SET
TUNER SET
= INITIAL SET
#
.
HI-FI REC LEVEL CTL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
47
EN