Skip Search - JVC HR-S7500U Instructions Manual

TimeScan
Names of
special-effects
playback
–7 x
Speed
Audio output Audio is output.
*Still mode cannot be engaged using the TIME SCAN button. Still mode can only be engaged
by pressing the PAUSE button.
The VCR's TimeScan indicator lights during TimeScan.
The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.
The TimeScan search speed is the same for SP and EP recordings.
To resume normal playback, press PLAY.
When using the VCR's TIME SCAN SHUTTLE ring, the playback speed may not change depending on how far it is turned.
When using the VCR's TIME SCAN SHUTTLE ring, the playback speed will change up to 7 and –7 search speeds. Turning the
TIME SCAN SHUTTLE ring further will not increase the search speed.
Picture may be distorted at the position where the recording speed is switched.
The picture may be noisy or distorted for a moment when you change the playback speed.
During high-speed search with a tape containing both SP and EP recordings, where the recording tape speed switches from EP to
SP, the search speed will change automatically to 7 normal playback speed with TimeScan.
Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
Picture may appear distorted in comparison to normal playback.
In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
TimeScan sound quality will differ in comparison to normal playback.
When material such as music videos where there is non-stop sound (very few breaks in the sound track) are viewed at 2x normal
speed, the audio playback may be faster than normal.
When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF" (
1
Reverse
Search Play Slow-Motion
1
–5 x –3 x –1 x – /
6
Audio is
not output.
0
4

SKIP SEARCH

*Still Slow-Motion
1 1
x – / x 0 / x
18 18
Audio Audio is
is output. not output.
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press SKIP SEARCH 1 to 4 times during playback. Each
press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
NOTES:
To return to normal playback during a Skip Search,
press PLAY .
If the Skip Menu screen appears, see page 30.
Forward
Play Search
1
/ x 1 x 2 x 3 x
6
Audio is output.
pg. 36).
35
EN
5 x 7 x